0
KONFIGURASI EIRGP DI CICSO PACKET TRACER
Posted by Citraemilda541
on
21.24
Haii...Kali ini saya mau posting tentang konfigurasi EIRGP,Silakan lihat...
CHECK THIS OUT>>>>
Susunlah 2 buah router dan 2 buah PC/Laptop seperti dibawah ini dengan kabel cross
Pertama-tama lakukan setting IP pada PC/Laptop seperti dibawah ini :
*LAPTOP0
Kemudian settinglah router0 dan router1 seperti dibawah ini :
1.Setting pada Router0
Router>ena
Router#conf t
Enter configuration commands, one
per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add
192.168.1.3 255.255.255.0
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0,
changed state to up
%LINEPROTO-5-UPDOWN: Line protocol
on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#int fa0/1
Router(config-if)#ip add
192.168.0.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface
FastEthernet0/1, changed state to up
Router(config-if)#int fa0/1
Router(config-if)#ip add
192.168.0.1 255.255.255.252
Router(config-if)#no sh
Router(config-if)#exit
Router(config)#write
^
% Invalid input detected at '^'
marker.
Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol
on Interface FastEthernet0/1, changed state to up
Router(config)#router eigrp 10
Router(config-router)#network
192.168.1.0
Router(config-router)#network
192.168.0.0
Router(config-router)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from
console by console
Router#
%DUAL-5-NBRCHANGE: IP-EIGRP 10:
Neighbor 192.168.0.2 (FastEthernet0/1) is up: new adjacency
2.Setting Pada Router1
Router>ena
Router#conf t
Enter configuration commands, one
per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add
192.168.0.2 255.255.255.252
^
% Invalid input detected at '^'
marker.
Router(config-if)#ip add
192.168.0.2 255.255.255.252
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface
FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol
on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#int fa0/1
Router(config-if)#ip add
172.10.10.20 255.255.0.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface
FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol
on Interface FastEthernet0/1, changed state to up
Router(config-if)#exit
Router(config)#router eigrp 10
Router(config-router)#network
172.10.0.0
Router(config-router)#network
192.168.0.0
Router(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 10:
Neighbor 192.168.0.1 (FastEthernet0/0) is up: new adjacency
Router(config-router)#exit
Router(config)#router eigrp 10
Router#
%SYS-5-CONFIG_I: Configured from
console by console
Kemudian Gambar kabel akan berubah warna menjadi hijau,itu belum menandakan jaringan terhubung.Untuk memastikan jaringan telah tersambung,lakukan tes
ping antar PC/Laptop seperti dibawah ini :
Sekiannnn.....^_^
Posting Komentar